Engine oils, transmissions, hydraulics, coolants, greases and specialty line. Professional catalogue available in single unit, pallet and B2B volumes.
Automotive, workshops, fleets and transport.
Top-performance LOW SAPS synthetic for modern petrol and diesel engines with particulate filters (DPF) and catalysts (CAT).
Fuel-saving LOW SAPS synthetic for GDI/HDI, hybrid and after-treatment-equipped engines. High LSPI resistance.
MID SAPS synthetic for petrol and TDI-PD diesel. Specially formulated for VW Group pump-injector engines requiring VW 505.01.
New-tech synthetic for VW Group TDI-PD and direct-injection turbo engines. NOT DPF-compatible.
Versatile semi-synthetic. Good balance of protection, consumption and price.
Reinforced mineral for car and commercial vehicle fleets. Designed for long-haul TIR.
Reinforced semi-synthetic for car fleets. Better cold flow than the equivalent 15W40.
2T oil for air-cooled outboard engines. Compatible with any petrol, homogeneous and stable mix.
Premium synthetic 2T oil for motorcycles, chainsaws, brush cutters and small petrol machinery.
UHPD for intensive Euro V/VI and EPA 2007 fleets. Low SAPS, DPF/SCR-compatible. Extended drain intervals.
HD for Euro V and earlier diesel engines, without DPF, EGR and SCR compatible. Up to 2% fuel savings.
Semi-synthetic HD for Euro V and earlier. Better cold starting than 15W40, up to 2% fuel savings.
Reinforced mineral for heavy diesel, buses and OP/agricultural machinery Euro 2-3.
Economical mineral for conventional diesel fleets. Good performance in basic maintenance.
High-body semi-synthetic for light petrol/diesel vehicle fleets. Long-haul TIR.
Monograde for machinery, classic heavy-duty fleets and applications in stable climates.
High-viscosity monograde. Suitable for heavy machinery in hot climates.
Synthetic fluid for modern automatic transmissions and servo-transmissions. Excellent thermal stability and anti-wear properties.
Mineral ATF fluid for classic automatic transmissions, torque converters, turbo clutches and mobile hydraulic systems. Severe service.
Light oil for passenger car manual gearboxes. Excellent cold smoothness.
The EP GL-4 standard for medium-duty manual gearboxes and differentials.
Gear oil for hot climates and medium loads. Long service life.
High-viscosity gear oil for differentials under severe load.
Heavy high-viscosity gear oil. Industrial and heavy-duty applications.
Mineral oil for industrial gearboxes with no special demands: turbines, chains, bearings and medium-load roller bearings.
Ready-to-use green coolant. Protects aluminium engines and alloys. Recommended for long change intervals.
Green 30% coolant free of nitrites, amines, phosphates and silicates. For temperate climates and maintenance.
Ready-to-use pink coolant for VAG and compatible vehicles.
Pink 30% version free of nitrites, amines, phosphates and silicates. For VAG vehicles in temperate climates.
Concentrated antifreeze to dilute as needed. Custom blend.
Construction and earthmoving machinery.
UHPD for intensive Euro V/VI and EPA 2007 fleets. Low SAPS, DPF/SCR-compatible. Extended drain intervals.
HD for Euro V and earlier diesel engines, without DPF, EGR and SCR compatible. Up to 2% fuel savings.
Semi-synthetic HD for Euro V and earlier. Better cold starting than 15W40, up to 2% fuel savings.
Reinforced mineral for heavy diesel, buses and OP/agricultural machinery Euro 2-3.
Economical mineral for conventional diesel fleets. Good performance in basic maintenance.
High-body semi-synthetic for light petrol/diesel vehicle fleets. Long-haul TIR.
Monograde for machinery, classic heavy-duty fleets and applications in stable climates.
High-viscosity monograde. Suitable for heavy machinery in hot climates.
Light oil for passenger car manual gearboxes. Excellent cold smoothness.
The EP GL-4 standard for medium-duty manual gearboxes and differentials.
Gear oil for hot climates and medium loads. Long service life.
High-viscosity gear oil for differentials under severe load.
Heavy high-viscosity gear oil. Industrial and heavy-duty applications.
Mineral oil for industrial gearboxes with no special demands: turbines, chains, bearings and medium-load roller bearings.
HM hydraulic ISO VG 32 for industrial systems with high-pressure pumps. 20-micron microfiltered.
The industrial standard. Versatile ISO VG 46 HM hydraulic for most applications.
ISO VG 68 HM hydraulic. Hot climates and severe-load applications.
HLP hydraulic for public works and agriculture. Good demulsibility behaviour.
Higher-viscosity HLP hydraulic for earth-moving and agricultural machinery.
High viscosity index hydraulic for wide temperature range. Heavy outdoor machinery.
Oil for heavy-duty hydraulic pumps and equipment. Excellent control of oxidation, corrosion, wear and rust.
Single multifunctional fluid for transmission, hydraulic and brakes in agricultural and public works machinery.
Premium mineral oil for rotary, piston compressors and vacuum pumps. Ashless, zinc-free.
Oil for compressors with higher discharge temperature. Long service life.
Oil for high-pressure compressors with severe discharge.
NLGI 2 EP lithium grease for bearings, joints, chains and friction points. The universal EP standard.
NLGI 3 EP lithium grease for high-RPM bearings, vertical applications or demanding mechanical stability.
Blue lithium grease for automotive, machinery, transport and industry. Available in 0/00/000 (guides/centralised lubrication) and 1/2 (chains) consistencies.
Molybdenum disulphide grease for extreme loads and impacts. Heavy-duty vehicles and construction.
Calcium sulphonate grease. Outstanding resistance to water, high temperature and corrosion.
Biodegradable oil for sensitive-area applications: water, forestry, organic agriculture.
Adhesive biodegradable oil for forestry chainsaw chains and guides.
Biodegradable lubricant for steel cables. Corrosion protection without pollution.
General-purpose biodegradable oil for sensitive environments where contamination is critical.
Ready-to-use mould release, mineral-oil-based emulsion free of solvents. Biodegradable >90%.
Concentrated mould release. Dilute 8-15% in water or mix 1:2/1:1 with diesel. Very competitive cost per m² on large projects.
Agricultural machinery and farms.
UHPD for intensive Euro V/VI and EPA 2007 fleets. Low SAPS, DPF/SCR-compatible. Extended drain intervals.
HD for Euro V and earlier diesel engines, without DPF, EGR and SCR compatible. Up to 2% fuel savings.
Semi-synthetic HD for Euro V and earlier. Better cold starting than 15W40, up to 2% fuel savings.
Reinforced mineral for heavy diesel, buses and OP/agricultural machinery Euro 2-3.
Economical mineral for conventional diesel fleets. Good performance in basic maintenance.
High-body semi-synthetic for light petrol/diesel vehicle fleets. Long-haul TIR.
Monograde for machinery, classic heavy-duty fleets and applications in stable climates.
High-viscosity monograde. Suitable for heavy machinery in hot climates.
Light oil for passenger car manual gearboxes. Excellent cold smoothness.
The EP GL-4 standard for medium-duty manual gearboxes and differentials.
Gear oil for hot climates and medium loads. Long service life.
High-viscosity gear oil for differentials under severe load.
Heavy high-viscosity gear oil. Industrial and heavy-duty applications.
Mineral oil for industrial gearboxes with no special demands: turbines, chains, bearings and medium-load roller bearings.
HM hydraulic ISO VG 32 for industrial systems with high-pressure pumps. 20-micron microfiltered.
The industrial standard. Versatile ISO VG 46 HM hydraulic for most applications.
ISO VG 68 HM hydraulic. Hot climates and severe-load applications.
HLP hydraulic for public works and agriculture. Good demulsibility behaviour.
Higher-viscosity HLP hydraulic for earth-moving and agricultural machinery.
High viscosity index hydraulic for wide temperature range. Heavy outdoor machinery.
Oil for heavy-duty hydraulic pumps and equipment. Excellent control of oxidation, corrosion, wear and rust.
Single multifunctional fluid for transmission, hydraulic and brakes in agricultural and public works machinery.
NLGI 2 EP lithium grease for bearings, joints, chains and friction points. The universal EP standard.
NLGI 3 EP lithium grease for high-RPM bearings, vertical applications or demanding mechanical stability.
Blue lithium grease for automotive, machinery, transport and industry. Available in 0/00/000 (guides/centralised lubrication) and 1/2 (chains) consistencies.
Molybdenum disulphide grease for extreme loads and impacts. Heavy-duty vehicles and construction.
Biodegradable oil for sensitive-area applications: water, forestry, organic agriculture.
Adhesive biodegradable oil for forestry chainsaw chains and guides.
Biodegradable lubricant for steel cables. Corrosion protection without pollution.
General-purpose biodegradable oil for sensitive environments where contamination is critical.
Plants, manufacturing and maintenance.
HM hydraulic ISO VG 32 for industrial systems with high-pressure pumps. 20-micron microfiltered.
The industrial standard. Versatile ISO VG 46 HM hydraulic for most applications.
ISO VG 68 HM hydraulic. Hot climates and severe-load applications.
HLP hydraulic for public works and agriculture. Good demulsibility behaviour.
Higher-viscosity HLP hydraulic for earth-moving and agricultural machinery.
High viscosity index hydraulic for wide temperature range. Heavy outdoor machinery.
Oil for heavy-duty hydraulic pumps and equipment. Excellent control of oxidation, corrosion, wear and rust.
Premium mineral oil for rotary, piston compressors and vacuum pumps. Ashless, zinc-free.
Oil for compressors with higher discharge temperature. Long service life.
Oil for high-pressure compressors with severe discharge.
NLGI 2 EP lithium grease for bearings, joints, chains and friction points. The universal EP standard.
NLGI 3 EP lithium grease for high-RPM bearings, vertical applications or demanding mechanical stability.
Blue lithium grease for automotive, machinery, transport and industry. Available in 0/00/000 (guides/centralised lubrication) and 1/2 (chains) consistencies.
Molybdenum disulphide grease for extreme loads and impacts. Heavy-duty vehicles and construction.
Calcium sulphonate grease. Outstanding resistance to water, high temperature and corrosion.
Mineral oil for vertical, oblique and horizontal slideway lubrication. Prevents stick-slip effect.
Biodegradable oil for sensitive-area applications: water, forestry, organic agriculture.
Adhesive biodegradable oil for forestry chainsaw chains and guides.
Biodegradable lubricant for steel cables. Corrosion protection without pollution.
General-purpose biodegradable oil for sensitive environments where contamination is critical.
High-purity mineral white oil certified NSF H1, USP and pharmacopoeias. For food, cosmetic, pharmaceutical and cork industries.
White EP cutting fluid, new formulation for all types of metal machining. CNC and centralised system compatible.
Chlorine-free, secondary-amine-free semi-synthetic cutting fluid. For all metal types in CNC. EP capacity and very stable emulsion.
Degreasing solvent for industrial cleaning and mechanical maintenance.
Tell us the engine, machine or specification you need. Our technical team will identify the right Lubrifly reference.
Complete catalogue · Technical documentation available upon professional request.
